TEL : 070-5121-1548 | EMAIL : help@beehappy.co.kr

NanoPC-T3 SingleBoard

₩90,000

* 부가세별도
상품코드 : 00005955
납기일 : 3~7일
재고 : 해외

미재고 주문이 가능합


상품 설명

 

NanoPC-T3

FriendlyARM’s 64-bit ARM Board Debuts

T3_en_001
T3_en_002

The NanoPC-T3 octa-core single board computer is designed and developed by FriendlyARM
for professional and enterprise users. It uses the Samsung Octa-Core Cortex-A53 S5P6818 SoC.
Compared to the FriendlyARM NanoPC-T2 the NanoPC-T3 not only has all the T2’s interfaces
and ports but also has a more powerful SoC.

Its dynamic frequency scales from 400M up to 1.4GHz. The NanoPC-T3 has 8G eMMC onboard,
audio jack, video input/output interfaces, built-in WiFi, Bluetooth and Gbps Ethernet port. In
addition the NanoPC-T3 has power management, on board porcelain antenna and serial debug port.

To avoid overheat issues the NanoPC-T3 has a heat sink with mounting holes.

T3_en_03

The NanoPC-T3 has two camera interfaces : a DVP camera interface and MIPI-CSI interface,
and four video interfaces : HDMI 1.4A, LVDS, parallel RGB-LCD interface and MIPI-DSI interface.
It Supports RTC and has RTC interface pins. It has four USB ports with two being type A ports
and two being 2.54mm pitch pin-headers.

T3_en_04

The NanoPC-T3 supports muitple OS systems e.g. Android 5.1, Debian and ubuntoCore+Qt.
It is an open source project with rich interfaces and ports. It is born a choice for professional
and enterprise users.

T3_en_06

 

  • SoC : Samsung S5P6818 Octa-Core Cortex-A53, 400M Hz – 1.4G Hz
  • Power Management Unit : AXP228 PMU, it supports software power-off and wake-up
  • Systm Memory : 1GB / 2GB 32bit DDR3 RAM
  • Storage : 1 x SD Card Socket
  • Ethernet : Gbit Ethernet (RTL8211E)
  • WiFi : 802.11 b/g/n
  • Bluetooth : 4.0 dual mode
  • Antenna : Porcelain Antenna IPX Interface
  • eMMC : 8GB
  • Video Input : DVP Camera / MIPI-CSI (two camera interfaces)
  • Video Output : HDMI Type-A / LVDS / Parallel RGB-LCD / MIPI-Dsi (four video output interfaces)
  • Audio : 3.5 mm audio jack / via HDMI
  • Microphone : onboard Microphone
  • USB Host : 4 x USB 2.0 Host, two A ports and two 2.54 mm pitch pin-headers
  • MicroUSB : 1 x MicroUSB 2.0 Client, Type A
  • LCD Interface : 0.5 mm pitch 45 pin FPC seat, full color RGB 8-8-8
  • HDMI : 1.4A type A, 1080P
  • DVP Camera : 0.5 mm pitch 24 pin FPC seat
  • GPIO : 2.54 mm pitch 30 pin-header
  • Serial Debug Port : 2.54 mm pitch 4-pin-header
  • User Key : K1 (power), Reset
  • LED : 1 x power LED and 2 x GPIO LED
  • Other Resources : CPU’s internal TMU
  • Heat Sink : 1 x Heat Sink with mounting holes
  • Power : DC 5V/2A
  • PCB : Six Layer
  • Dimension : 100 mm x 60 mm
  • OS/Software : uboot, Android and Debian







Comprehensive Drivers & Rich Tutorials

Device / Driver Driver Source Code Files
 Cross Compiler arm-cortexa9-linux-gnueabihf-4.9.3

Linux Driver and Source Code Files

Kernel:linux-3.4.39
Support EXT4/NFS/FAT32
Watchdog drivers/wathdog/nxp_wdt.c
RTC drivers/rtc/rtc-nxp.c
LED drivers/leds/
leds-gpio.c, leds-pwm.c
User Key drivers/input/keyboard/nxp_io_key.c
SPI drivers/spi-pl022.c
I2C drivers/i2c/busses/i2c-nxp.c
PWM arch/arm/mach-s5p4418/pwm.c
ADC drivers/staging/iio/adc/nxp_adc.c
Capacitive touch/Resistive touch drivers/input/touchscreen/
ft5x0x_ts.c, it7260_mts.c
FriendlyARM One-wire driver

drivers/input/touchscreen/
1wire_houst.c, ts-if.c

LCD backlight, suppor 127 backlight levels
USB Host: support USB drive, USB Hub, USB keyboard and USB mouse drivers/usb/host/ehci-synop.c
USB Device: support USB ADB drivers/usb/host/dwc_otg
SD/MMC drivers/mmc/host/dw_mmc*.c
Serial drivers/tty/serial/amba-pl011.c
Audio (audio recording and playing, ALSA compatible) sound/soc/codecs/snd-soc-es8316.c
sound/soc/nexell
Gbit Ethernet (RTL8211E) drivers/net/ethernet/nexell, drivers/net/phy/realtek.c
WiFi (ap6212) drivers/wireless/bcm4336
arch/arm/plat-s5p4418/nanopi2/wifi_pm.c
Bluetooth drivers/Bluetooth
arch/arm/plat-s5p4418/nanopi2/bt_bcm.c
Power Management(AXP228) drivers/power/axp_power
HDMI arch/arm/mach-s5p4418/prototype/module
arch/arm/mach-s5p4418/soc
drivers/media/video/nexell
DVP Camera(OV5640) drivers/media/video/ov5640.c
Lvds(origianl kernel module, we didn’t test it) arch/arm/mach-s5p4418/prototype/module
arch/arm/mach-s5p4418/soc
Multimedia 2D/3D (only for Android) ANDROID/hardware/samsung_slsi/slsiap/modules/vr
Video encoding &decoding ANDROID/vendor/nexell/s5p4418/modules/coda960
Framebuffer drivers/video/nxp-fb*.c
arch/arm/mach-s5p4418/soc
Ultra-sonic drivers/char/matrix_hcsr04.c
IR receiver drivers/char/matrix_ir_recv.c
Rotary encoder drivers/char/matrix_rotary_encoder.c
ADS7846 drivers/char/matrix_ads7846.c
USB keyboard & mouse drivers/hid
USB camera drivers/media/video/uvc
drivers/media/video/gspca

Make an Installation SD Card under Windows

Before play with your NanoPC-T3 please get the following items ready

  • NanoPC-T3
  • SD Card: Class 10 or Above, minimum 8GB SDHC
  • 5V/2A power adapter
  1. FriendlyARM packaged a Windows utility “Win32DiskImager.exe” which can used to make an installation card.
  2. Follow the instructions on our wiki and download the image files from   http://wiki.friendlyarm.com/wiki/index.php/NanoPC-T3
  3. Uncompress these files. Insert an SD card(at least 4G) into a Windows PC, run the win32diskimager utility as administrator. On the utility’s main window select your SD card’s drive and the image files and click on “write” to start flashing the SD card.
  4. After it is done please insert this card to your NanoPC-T3 and power on (with a 5V/2A power source). If the red LED is on and green LED is blinking this indicates your NanoPi2 is successfully booted.


RGB LCD Interface Pin Spec

Pin# Name Description
1, 2 VDD_5V 5V Output, it can be used to power LCD modules
11,20,29, 37,38,39,40, 45 DGND Ground
3-10 Blue LSB to MSB RGB blue
12-19 Green LSB to MSB RGB green
21-28 Red LSB to MSB RGB red
30 GPIOB25 available for users
31 GPIOC15 occupied by FriendlyARM one wire technology to recognize LCD models and control backlight and implement resistive touch, not applicable for users
32 XnRSTOUT Form CPU low when system is reset
33 VDEN signal the external LCD that data is valid on the data bus
34 VSYNC vertical synchronization
35 HSYNC horizontal synchronization
36 LCDCLK LCD clock, Pixel frequency
41 I2C2_SCL I2C2 clock signal, for capacitive touch data transmission
42 I2C2_SDA I2C2 data signal, for capacitive touch data transmission
43 GPIOC16 interrupt pin for capacitive touch, used with I2C2
44 NC Not connected

 

WIKI:http://wiki.friendlyarm.com/wiki/index.php/NanoPC-T3